PayPal
Shop now using PayPal!
My Cart
You have no items in your shopping cart.
Resellers
Are you a dealer? Contact us to get the best terms.
Vanaprastha.org
Give a smile to a child.
New Products
-
-
Bali Mini
Starting at: €7.80 -
CableClips
Starting at: €9.99 -
Danger Shield
€25.70
DIY Drones Products
14 Item(s)
List Grid
-
€2.20 €1.983x16 Right Angle Pin Headers
Very useful 3x16 90 degree angle pin header. -
€1.603x8 Right Angle Pin Headers
Very useful 90 degree angle pin header for low profile applications. -
€88.40ArduIMU+ V2 (Flat)
Why '+' in the name? Because it's an Inertial Measure Unit (sensors and hardware filter circuitry) plus an Arduino-compatible processor that can run the Attitude Heading Reference System (AHRS) code, based on Bill Premerlani's DCM algorithm.
1 of 6 Pin Right Angle Male Header is included with the product ArduIMU+ V2 (Flat). -
€155.90ArduPilot Mega IMU Shield/OilPan Rev-H V1.0 (With pin headers)
This is the new ArduPilotMega IMU Shield!
This board features a large array of sensors needed for UAV and Robotics applications, including three axis angular rotation and accelerations sensors, absolute pressure and temperature sensor, 16MBits data logger chip and more!
ArduPilot Mega IMU Shield/OilPan Rev-H V1.0 is designed to fit on top (or bottom) of the ArduPilot ... -
€48.00ArduPilot Shield V2 Kit
ArduPilot Shield V2 Kit is a great deal because this shield kit includes everything you need:- ArduShield Board, with MPXV7002DP sensor.
- Female Pin Headers.
- Male Pin Headers.
- Pitot Tube.
- Custom made FMA cable.
- Housing Connector Header
- 3 Servo Extension.
- Bing Plug.
- Reset button.
- Extra wire.
-
€4.80 €4.45ATmega328 with Arduino Duemilanove Bootloader
An ATmega328 in DIP package, pre-loaded with the Arduino Duemilanove Bootloader.
ATmega328 will allow you to use Arduino code in your custom embedded project without having to use an Arduino Duemilanove board. -
€18.00FTDI Cable 3.3V
This a practical and easy to use FTDI cable 3.3V. -
Regular Price: €95.80
Special Price: €89.50
GS407 U-Blox5 GPS 4Hz (New Antenna + Free uBlox Adapter Basic)
Now the new antenna GS407 comes with free uBlox adapter basic and 5cm cable!
The uBlox is ArduPilot Ready. -
€39.90HMC5843 - Triple Axis Magnetometer Rev 1.2
This is a 3-axis digital compass board based on the Honeywell's HMC5843.
This magnetometer has an I2C translator and 3.3V power regulator and the board can be used on our ArduIMU+ and ArduPilotMega Shield or any microcontroller.
This revision reduces the overall size of the board while keeping all of its previous features! -
€10.90I2C/SMBus Voltage Translator (I2C Level Shifter)
This great tiny board will allow to interface slave 3.3V I2C devices like magnetometers and pressure sensors with master 5V devices like AVR/PIC microcontrollers; WITHOUT THE USE OF A DIRECTIONAL PIN.
I2C/SMBus Voltage Traslator also features a built-in 3.3V power regulator and dual pull-resistors (5V and 3.3V sides). The pull-up resistors can be optionally and independently ... -
€20.60Kit MPXV7002DP
Stand-alone airspeed sensor that includes Pitot Tube and Servo Cable. -
€39.90MediaTek MT3329 GPS 10Hz + Adapter Basic
The state-of-the-art 66 channels MediaTek MT3329 GPS Engine
High sensitivity: Up to -165dBm tracking, superior urban performance
USB/UART Interface
Build-in patch antenna for optimal sensitivity
DGPS(WAAS, EGNOS, MSAS) support (optional by firmware)
Maximum update rate: up to 10Hz (optional by firmware)
RoHS compliant
The following items are included ... -
€1.50Servo Extension Cable 5cm Female-Female
Servo Jumper (Female, double sided) 5 cm. -
€23.00XtreamBee Board (No XBee included)
This is the most advanced and competitive XBee interface board you will find!
XtreamBee Board is breadboard compatible, has 4 status LED's (one selectable to display ASC or RSSI), built-in 3.3V power regulator, configuration solder jumpers and an unique feature that allows you set the device as Master or Slave FTDI mode with a simple slide of a switch!
14 Item(s)
List Grid
