My Cart
You have no items in your shopping cart.
Shop By
Shopping Options
- Price
-
- €0.00 - €10.00 (8)
- €10.00 - €20.00 (5)
- €20.00 - €30.00 (1)
- €30.00 - €40.00 (1)
Resellers
Are you a dealer? Contact us to get the best terms.
PayPal
Shop now using PayPal!
You don't have a PayPal account yet? Use your credit card directly and safely on PayPal, without signing up for a PayPal account! Learn More
New Products
Vanaprastha.org
Give a smile to a child.
Breakout Boards
15 Item(s)
List Grid
-
€0.95AVR Programming Adapter
This is a simple, but extremely handy board to adapt the common 10-pin ISP programmers to the smaller 6-pin ISP connections.
Board comes bare. We recommend ordering male pins to insert into the programmer and female pins to couple to the ISP connector on your target. -
€9.50Breakout Board for AD5330 Parallel 8-Bit DAC
Simple breakout board for Analog Device's AD5330 8-bit digital-to-analog converter (DAC). The AD5330 has a parallel interface and can operate from a 2.5 to 5.5V supply consuming just 115uA (at 3V).
Dimensions: 0.80 x 1.10″ -
€26.95 €24.50Breakout Board for CP2102 mini USB to Serial
The μUSB-MB5 is a USB to serial (TTL) converter which is simple, cost effective, very small and easy to use.
Features:- USB 2.0 compliant 12Mbps maximum speed
- Hardware or Xon/Xoff handshaking supported; 300bps to 1Mbps
- UART supports 5-8 bit data, 1-2 Stop bits, odd/even and no parity
- Integrated EEPROM for Vendor ID, product
-
€8.20Breakout Board for Electret Microphone
This small Breakout Board couples a small Electret Microphone with a 100x opamp to amplify the sounds loud enough to be picked up by a microcontroller's Analog to Digital converter. -
€11.30Breakout Board for FT232RL USB to Serial
Basic breakout board for FTDI's popular USB to UART IC. Now with internal oscillator and EEPROM, the FT232RL is an impressive IC!
Dimensions: 0.9x1.25″.
Board comes assembled with IC as shown. -
€1.60 €1.45Breakout Board for USB microB
This simple board breaks out a micro-B USB connector's VCC, GND, D- and D+ pins to a 0.1″ pitch header.
Dimensions: 0.8 x 0.45″ (20.3 x 11.4mm) -
€1.60 €1.45Breakout Board for USB miniB
This Breakout Board for USB miniB new version now has all 5 pins broken out on the connector. -
€7.25 €6.55Button Pad 4x4 - Breakout PCB
This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. -
€12.90 €11.65DS1307 Real Time Clock Breakout Board Kit
This is a great battery-backed real time clock (RTC) that allows your microcontroller project to keep track of time even if it is reprogrammed, or if the power is lost.
DS1307 breakout board is a kit and requires some light soldering which should only take about 15 minutes.
Images by adafruit - Adafruit website. -
€13.00 €11.70FTDI Basic Breakout - 5V
This is the newest revision of the FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same. -
€18.00 €16.30FTDI Friend + extras - v1.0
Long gone are the days of parallel ports and serial ports. Now the USB port reigns supreme!
But USB is hard, and you just want to transfer your every-day serial data from a microcontroller to computer. What now? Enter the FTDI Friend!
Images by adafruit - Adafruit website. -
€39.60 €35.65Humidity and Temperature Sensor - SHT15 Breakout
This is a simple breakout board for the SHT15 humidity sensor from Sensirion. The SHT15 digital humidity and temperature sensor is fully calibrated and offers high precision and excellent long-term stability at low cost.
The digital CMOSens Technology integrates two sensors and readout circuitry on one single chip. -
€11.60Lilypad FTDI Basic Breakout - 5V
This is the LilyPad revision of our FTDI Basic.
It is the same as our other FTDI Basic, but has a purple LilyPad board which is half the thickness. -
€1.80 €1.62Logic Level Converter
The SparkFun logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V.
This level converter also works with 2.8V and 1.8V devices.
Bread board friendly!
Can be used with normal serial, I2C, SPI, and any other digital signal. Does not work with an analog signal.
Dimensions: 0.5 x 0.6″ -
€3.60WiiChuck Adapter
The WiiChuck Adapter is a small PCB that is designed to be inserted into the connector of a Nintendo Wii Nunchuck to provide access to all 4 wires of the remote.
The SparkFun WiiChuck Adapter allows you to interface with the Nunchuck without making a mess and cutting the wires.
15 Item(s)
List Grid
