Components
List Grid
-
3-Axis Accelerometer Module
The 3-axis accelerometer module carries an MMA7260QT chip from Freescale.
The MMA7260QT operates in 4 selectable sensitivity modes, +/- 1.5g, 2g, 4g, and 6g. It also offers a 1-pole low pass filter as well as temperature compensation. Furthermore, the MMA7260QT has a Sleep Mode function, ideal for use in portable, battery powered devices. -
4-Digit 7-Segment Display
This is a basic, 4-digit 7-segment display - green in color. It has a common anode. The display features one decimal point per digit, and individually controllable apostrophe and colon points.
Dimensions:- Overall Display: 40.18 x 12.8 mm (1.58 x 0.50")
- Digit Height: 10mm (0.39")
-
-
€1.15 €1.057-Segment Red LED Display
A basic 7-segment Red LED Display (SparkFun). Common anode. Two decimal points, but only the one on the right is wired.
Digit height is 0.6".
Overall height is 1". -
7-Segment Serial Display
The 7-Segment Serial Display turns the thirteen pins necessary to control a 4-digit 7-segment display into just one or three. The display will give you full control of all digits, decimal points, the colon and the apostrophe.
At the heart of the display is an ATMega168 which controls all the serial communications and the 4-digit 7-segment display through an easy to use API. -
7-Segment Serial Display - New Version
The 7-Segment Serial Display turns the thirteen pins necessary to control a 4-digit 7-segment display into just one or three. The display will give you full control of all digits, decimal points, the colon and the apostrophe.
At the heart of the display is an ATMega328 which controls all the serial communications and the 4-digit 7-segment display through an easy to use API. -
Aluminum Electrolytic Capacitors 10UF 25V KS Radial
Aluminum Electrolytic Capacitors, type A series KS, capacitance 10µF.
Sold in package of 5 pieces. -
AMBI Light Sensor
The 'AMBI' is a small board that carries a Sharp GA1A1S201WP surface-mount ambient light sensor. The AMBI's 3-pin interface mounts directly onto the analog pins on an Arduino. -
€0.30 €0.27Amplifier Transistor P2N2222AG NPN LP 40V TO92
Discrete semiconductor amplifier transistors (BJT) P2N2222AG, type NPN silicon. -
€88.40 €79.60ArduIMU+ V2 (Flat)
Why '+' in the name? Because it's an Inertial Measure Unit (sensors and hardware filter circuitry) plus an Arduino-compatible processor that can run the Attitude Heading Reference System (AHRS) code, based on Bill Premerlani's DCM algorithm.
1 of 6 Pin Right Angle Male Header is included with the product ArduIMU+ V2 (Flat). -
Audio Jack Modem for iPhone and Android
With this audio jack modem now you can integrate your iPhone or Android smartphone into your next embedded project.
Some software is required on the phone side, and of course there is an Arduino library. -
Barometric Pressure Sensor - BMP085 Breakout
This is a simple breakout board for the BMP085 high-precision, low-power barometric pressure sensor. -
Basic 16x2 Character LCD
This is a Basic 16 Character by 2 line 5V LCD display with Black text on Green background.
SparkFun Basic 16x2 Character LCD utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need ~11 general I/O pins to interface to this LCD screen. Includes LED ... -
€0.28 €0.24Basic Green LED 5mm
This is a very basic 5mm LED with a green lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA. -
€0.28 €0.24Basic Red LED 5mm
This is a very basic 5mm LED with a red lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA.
List Grid


















