LED and Display
List Grid
-
4-Digit 7-Segment Display
This is a basic, 4-digit 7-segment display - green in color. It has a common anode. The display features one decimal point per digit, and individually controllable apostrophe and colon points.
Dimensions:- Overall Display: 40.18 x 12.8 mm (1.58 x 0.50")
- Digit Height: 10mm (0.39")
-
-
€1.15 €1.057-Segment Red LED Display
A basic 7-segment Red LED Display (SparkFun). Common anode. Two decimal points, but only the one on the right is wired.
Digit height is 0.6".
Overall height is 1". -
7-Segment Serial Display
The 7-Segment Serial Display turns the thirteen pins necessary to control a 4-digit 7-segment display into just one or three. The display will give you full control of all digits, decimal points, the colon and the apostrophe.
At the heart of the display is an ATMega168 which controls all the serial communications and the 4-digit 7-segment display through an easy to use API. -
7-Segment Serial Display - New Version
The 7-Segment Serial Display turns the thirteen pins necessary to control a 4-digit 7-segment display into just one or three. The display will give you full control of all digits, decimal points, the colon and the apostrophe.
At the heart of the display is an ATMega328 which controls all the serial communications and the 4-digit 7-segment display through an easy to use API. -
Basic 16x2 Character LCD
This is a Basic 16 Character by 2 line 5V LCD display with Black text on Green background.
SparkFun Basic 16x2 Character LCD utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need ~11 general I/O pins to interface to this LCD screen. Includes LED ... -
€0.28 €0.24Basic Green LED 5mm
This is a very basic 5mm LED with a green lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA. -
€0.28 €0.24Basic Red LED 5mm
This is a very basic 5mm LED with a red lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA. -
€0.28 €0.24Basic Yellow LED 5mm
This is a very basic 5mm LED with a yellow lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA.
Suggested using current: 16-18mA. -
BlinkM I2C Controlled RGB LED
BlinkM is a "Smart LED", a networkable and programmable full-color RGB LED for hobbyists, industrial designers, prototypers, and experimenters. It is designed to allow the easy addition of dynamic indicators, displays and lighting to existing or new projects.
If you've used up all your microcontroller PWM channels controlling RGB LEDs and still want more, BlinkM ... -
BlinkM MaxM
BlinkM MaxMs are smart LEDs that are more than 1000 times as bright as a standard LED. They put bright spots of color anywhere, and can control long chains of LEDs, such as found in LED strips or rope. -
BlinkM MinM
MinM is a tiny smart LEDs suitable for experimenting with wearable technology or for tight spots where you need just the right kind of light.
No electronics engineering or programming languages knowledges required! -
€34.00 €32.40Color LCD Shield
The Color LCD Shield provides an easy method of connecting the popular Nokia 6100 LCD to your Arduino USB or Pro. The board comes as shown with the 128x128 mini color LCD, as well as a backlight driver circuit (boosts to 7V), and three momentary push-buttons (tied through a jumper to ... -
€0.72 €0.65Infrared LED - 850nm
This is a very simple, clear infrared LED. -
€36.50 €33.90LED Matrix - Serial Interface - RG
This is the medium sized LED Matrix with a backpack that has been designed to take SPI serial input and display any graphics you pass it. All the refreshing and communication control is taken care of by the backpack.
It's even reprogrammable! Off, Red, Green, and Yellow colors are available.
Pictures show an example array of RGB matrices. These units do not have the Blue color available.
List Grid
















