This Compass Module made exclusively by Parallax is a dual-axis magnetic field sensor built around the Hitachi HM55B IC. Parallax has made this compass IC accessible by providing Hitachi's surface mount sensor chip with a 3 V onboard voltage regulator and resistor protection, all in a 0.3" wide 6-pin DIP module.
The Hitachi HM55B Compass Module is compatible with most microcontrollers (like Arduino) and all the Parallax microcontrollers (including the BASIC Stamp microcontroller's 5 V supply and signal levels). Acquiring measurements from the module is made easy with a synchronous serial interface, and even easier with the BASIC Stamp 2 commands SHIFTIN and SHIFTOUT.
Application Ideas:
The Hitachi HM55B Compass Module is compatible with most microcontrollers (like Arduino) and all the Parallax microcontrollers (including the BASIC Stamp microcontroller's 5 V supply and signal levels). Acquiring measurements from the module is made easy with a synchronous serial interface, and even easier with the BASIC Stamp 2 commands SHIFTIN and SHIFTOUT.
Application Ideas:
- Mobile and walking robot direction sensor.
- Handheld electronic compass.
- Weathervane indicator for remote weather stations.
- Audible compass for the vision impaired.
- Automotive electronic compass.
- Power: 5 VDC.
- Communications: synchronous.
- Dimensions: 0.4 x 0.5 x 0.45" ( 10.2 x 12.7 x 11.4 mm).
- Operating temp range: -4° to +185°F (-20° to +85°C).
You may also be interested in the following product(s)
Compass with Tilt Compensation - HMC6343
€129.90
|
OpenLog
€22.50
|
Force Sensitive Resistor
€7.25
|
Dual Axis Accelerometer ADXL320 +/-5g
€29.90
|
Breakout Board for CP2102 mini USB to Serial
€26.95
€24.50
|
PIR Sensor
€10.80
|
Dual Axis Accelerometer ADXL322 +/-2g
€29.90
|
Sharp GP2D12 IR Range Sensor
€15.00
|






