Related Products
Check items to add to the cart or select all
My Cart
You have no items in your shopping cart.
PayPal
Shop now using PayPal!
You don't have a PayPal account yet? Use your credit card directly and safely on PayPal, without signing up for a PayPal account! Learn More
Breakout board for the Dual Axis ADXL32x Accelerometers. Brings out the analog voltage levels from the X and Y axis to a standard .1" header. The SparkFun ADXL322 can be powered from 2.4V-5.25V and can support up to +/-2g. The Self-Test pin can be used to verify sensor operation.
Board comes fully assembled and tested with selected sensor and 0.1uF filtering capacitors.
Installed Sensor: ADXL322 (+/- 2g)
Dimensions: 18x18 mm (0.70x0.70")
Software: The ADXL32x outputs an analog voltage. This voltage is in ratio to the measured acceleration and to the supply voltage (ratiometric). You will need some extra hardware to convert this analog signal to a usable digital one. Luckily, many uCs have a built in Analog to Digital converter.
Board comes fully assembled and tested with selected sensor and 0.1uF filtering capacitors.
Installed Sensor: ADXL322 (+/- 2g)
Dimensions: 18x18 mm (0.70x0.70")
Software: The ADXL32x outputs an analog voltage. This voltage is in ratio to the measured acceleration and to the supply voltage (ratiometric). You will need some extra hardware to convert this analog signal to a usable digital one. Luckily, many uCs have a built in Analog to Digital converter.
You may also be interested in the following product(s)
Compass Module Hitachi HM55B
€35.00
|
Resistor Kit - 1/2W
€14.99
|
Triple Output LED RGB - Diffused
€1.81
€1.63
|
Arduino MEGARegular Price: €59.29 Special Price: €39.90 |
Dual-axis Accelerometer Memsic 2125
€35.00
|
Dual Axis Accelerometer ADXL320 +/-5g
€29.90
|
BlinkM I2C Controlled RGB LED
€12.00
|
Arduino Nano
€39.93
|
Arduino Duemilanove
€18.15
|
| Notes | Documents:
|
|---|
