Modules
List Grid
-
€23.50 €22.00Adafruit Motor Shield Kit
Full-featured motor shield for the Arduino Duemilanove and Bluetooth microcontroller.
- Power 2 to 4 DC motors 4.5V to 36V at 0.6A each
- Power 2 servo motors with a dedicated timer
- Power up to 2 stepper motors
- Soldering and assembly
-
Arduino Ethernet W/O PoE + USB2SERIAL
A single board that integrates the ATMEGA328 Uno microcontroller with the ETH shield. -
Arduino Mini USB Extension
Arduino Mini USB Extension is a USB to serial converter than can be used with Arduino Mini.
-
Arduino USB Extension Light
Arduino Mini USB Extension Light is a USB to serial converter (without downside connectors) than can be used with Arduino Mini.
-
Arduino Xbee Shield
The Arduino Xbee Shield Wireless Module allows an Arduino USB board to communicate wirelessly using a Zigbee Xbee wireless module. It is based on the NEW Maxstream Series 2 XBee™ ZigBee OEM RF Module that can communicate up to 100 feet indoors or 300 feet outdoors (with ...
-
ArduPilot - Arduino Compatible UAV Controller w/ ATMega328
ArduPilot is a Arduino-compatible autopilot board designed by DIY Drones using the new ATMega328.
Features:- Use with autonomous aircraft, car or boat.
- Based on a 16MHz Atmega328 processor (processing power aprox 24 MIPS).
- Built-in hardware failsafe with multiplexer chip and ATTiny processor. Includes ability to reboot the main
-
ArduPilot Mega - Arduino Mega compatible UAV Controller
The ArduPilot Mega is the newest version of autopilot board designed by Chris Anderson and Jordi Muñoz of DIY Drones using the ATmega1280.
Dimensions: 40mm x 69mm -
ArduPilot Mega IMU Shield/OilPan Rev-H V1.0 (With pin headers)
This is the new ArduPilotMega IMU Shield!
This board features a large array of sensors needed for UAV and Robotics applications, including three axis angular rotation and accelerations sensors, absolute pressure and temperature sensor, 16MBits data logger chip and more!
ArduPilot Mega IMU Shield/OilPan Rev-H V1.0 is designed to fit on top (or bottom) of the ArduPilot ... -
Audio Jack Modem for iPhone and Android
With this audio jack modem now you can integrate your iPhone or Android smartphone into your next embedded project.
Some software is required on the phone side, and of course there is an Arduino library. -
Bluetooth Mate Gold
The Bluetooth Mate Gold is designed specifically to be used with our Arduino Pros and LilyPad Arduinos. These modems work as a serial (RX/TX) ... -
ButtonPad
The ButtonPad by Liquidware, a miniature version of the ButtonShield, is a mini-shield for the Arduino Mega, specifically designed to turn it into a portable gadget, when combined with a TouchShield Slide (for a ... -
ButtonShield
The ButtonShield by Liquidware is a keyboard-style shield for the Arduino.
Details:- 32 key buttons
- 1 caps lock with dual LEDs
- 1 space bar
- Underglow LED
- 2 Operating Modes, A & B
- Fits squarely on top of Arduino
-
€34.00 €32.40Color LCD Shield
The Color LCD Shield provides an easy method of connecting the popular Nokia 6100 LCD to your Arduino USB or Pro. The board comes as shown with the 128x128 mini color LCD, as well as a backlight driver circuit (boosts to 7V), and three momentary push-buttons (tied through a jumper to ... -
Danger Shield
The Danger Shield mounts on top of your Arduino or Arduino Pro and equips it with a variety of fun and useful inputs and outputs.
This new version uses a different temperature sensor. This product comes as a kit of parts, which you'll have to solder into the included PCB. All parts are through-hole so it should go together relatively easily; but always check your component orientation before soldering! -
€24.00 €22.90Data logging shield for Arduino
Here's a handy Arduino shield for a dedicated and well-designed data logging shield.
Adafruit Data logging shield for Arduino is an inexpensive but well-rounded design easy to assemble and customize.
Images by adafruit - Adafruit website.
List Grid




















