Related Products
Check items to add to the cart or select all
My Cart
You have no items in your shopping cart.
PayPal
Shop now using PayPal!
You don't have a PayPal account yet? Use your credit card directly and safely on PayPal, without signing up for a PayPal account! Learn More
The Color LCD Shield provides an easy method of connecting the popular Nokia 6100 LCD to your Arduino USB or Pro. The board comes as shown with the 128x128 mini color LCD, as well as a backlight driver circuit (boosts to 7V), and three momentary push-buttons (tied through a jumper to pins D3-5).
The Nokia 6100 LCD is controlled through a 9-bit SPI interface. The control pins of the LCD are connected to the hardware SPI pins of the Arduino (D13 -SCK, D11 - DIO), the CS pin is tied to D9 and the reset pin is connected to D8. Voltage from the '5V' pin of the Arduino is boosted to 7V to power the LCD backlight.
The Nokia 6100 LCD is included with the Color LCD Shield. Headers are not soldered on, we recommend the 6 and 8-pin stackable headers.
The Nokia 6100 LCD is controlled through a 9-bit SPI interface. The control pins of the LCD are connected to the hardware SPI pins of the Arduino (D13 -SCK, D11 - DIO), the CS pin is tied to D9 and the reset pin is connected to D8. Voltage from the '5V' pin of the Arduino is boosted to 7V to power the LCD backlight.
The Nokia 6100 LCD is included with the Color LCD Shield. Headers are not soldered on, we recommend the 6 and 8-pin stackable headers.
You may also be interested in the following product(s)
Arduino UNO Rev3
€24.20
€22.99
|
LED Matrix - Serial Interface - RG
€36.50
€33.90
|
7-Segment Red LED Display
€1.15
€1.05
|
TouchShield SlideRegular Price: €179.90 Special Price: €167.00 |
LED Matrix - Serial Interface - RGB
€59.95
|
Basic 16x2 Character LCD
€12.68
|
| Notes | Documents:
|
|---|
