Tools and Equipment
Items 1 to 15 of 22 total
Page:
- 1
- 2
-
List Grid
-
9V Battery Holder
9V battery holder terminated with a standard 5.5 x 2.1mm, center-positive barrel jack, also features three mounting holes. -
9V to Barrel Jack Adapter
This simple cable has so many uses!
Plug a 9V battery into one end and connect the other end to anything with a 5.5x2.1mm, center-positive barrel jack. -
AC Voltage Detector Probe
Detect AC voltages 120/240 VAC without contact.
Visual and audible indicators.
AC Voltage Detector Probe is excellent for voltage tracing on 50/60Hz circuits. Convenient size with pocket clip. -
Anti-Static Wrist Strap (velcro)
Adjustable Anti-Static Wrist Strap with velcro.
Protects ICs and other equipment from static discharges. -
Battery Holder - 4xAA to Barrel Jack Connector
A simple 4 cell AA battery holder.
The 5 inch cable is terminated with a standard 5.5 x 2.1 mm, center positive barrel jack connector. -
€1.40 €1.27Battery Holder 2xAA with Cover and Switch
This 2xAA battery holder puts a nice finishing touch on your battery powered project.
Dimensions: 67.9 x 32.8 x 18.25mm -
Circuit Tester
The most reliable tool to tell if a circuit is complete.
This pocket sized Circuit Tester works with AC/DC 80-500 Volts.- Bright neon indicator.
- Pocket clip.
- Insulated case.
-
Diode / Transistor Tester
Diode / Transistor Tester checks transistors and diodes in circuit. Identifies NPN or PNP transistors. Checks small or large power types. -
FTDI Cable 3.3V
This a practical and easy to use FTDI cable 3.3V. -
€13.50 €12.20FTDI Cable 5V
The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this FTDI cable are configured to operate at 5V.
The FTDI cable is designed around an FT232RQ, which is housed in a USB A connector. The other side of the cable is terminated with a 0.1″ pitch, 6-pin connector with the following ... -
Illuminated LED Eye Loupe
When working with small parts, sometimes you need magnification and some extra light. This Illuminated LED Eye Loupe is a monocle with a 10x lens with a working distance of about 1-1/2". This product is very similar to the Illuminated Monocle Magnifier, but there is no attached aluminum-core headband.
This loop magnifier set itself apart in our eyes because of the ... -
Illuminated Monocle Magnifier
When working with small parts, sometimes you need magnification and some extra light. This Illuminated Monocle Magnifier has a 15x lens with a working distance of about 1-1/2" and a bright white LED. The 1" diameter eye piece fits snugly around your eye with a 15" aluminum-core headband. The LED provides sufficient light at the working distance.
This loop ... -
€9.90 €8.95Mini Volt Meter
Put a voltage meter anywhere with this very handy display. These are often used by RC hobbyists for keeping track of batteries but we thought it would be great on a breadboard or enclosure. -
OptiVisor - binocular headband magnifier
Optivisor is a precision binocular headband magnifier which permits unrestricted efficiency while reducing eye strain, leaves both hands free, and allows three dimensional vision.
Used by anyone whose profession or craft requires close accurate work. Can be worn over prescription or safety eyeglasses.
Items 1 to 15 of 22 total
Page:
- 1
- 2
-
List Grid



















