As a member of the XBee family of RF products, the module is easy-to-use, shares a common footprint, and leverages Digi's Drop-in Networking solutions including gateways and adapters. No configuration is necessary for out-of-the-box RF communications. The module's default configuration supports a wide range of data system applications. Advanced configurations can be implemented using simple serial AT commands.
XBee-PRO modules operate within the ISM 900 MHz frequency band. The modules are optimized for use in US and Canada.
Digi Part n: XBP09-DPWIT-156
Note: Some users have found that the XBee-PRO 900 cannot be used with the XBee Explorer Regulated. A work around that many users have found is to bypass diode D1 on the Explorer.
Features:
XBee-PRO modules operate within the ISM 900 MHz frequency band. The modules are optimized for use in US and Canada.
Digi Part n: XBP09-DPWIT-156
Note: Some users have found that the XBee-PRO 900 cannot be used with the XBee Explorer Regulated. A work around that many users have found is to bypass diode D1 on the Explorer.
Features:
- 3.3V at 210mA
- Fast 156 Kbps RF data rate
- 50 mW (+17 dBm) power output
- Up to 6 miles (10 km) RF LOS with high gain antennas
- Point-to-multipoint networking ideal for low-latency applications
- Support for large, dense networks
- 128-bit AES encryption
- ISM 900 MHz operating frequency
- Wire antenna
- Industrial temperature rating (-40° C to +85° C)
- Advanced mesh networking and low-power modes supported
- Approved for use in the United States and Canada
You may also be interested in the following product(s)
XBee Pro 900 RPSMA
€68.40
|
XtreamBee Board (No XBee included)
€23.00
|
XBee Adapter kit - v1.1
€11.95
|
Arduino Xbee Shield
€47.20
|
| Notes | Documents: |
|---|






