XtreamBee Board is the most advanced and competitive XBee interface board. In master mode you will be able to attach any USB FTDI cable/board and send/receive data like the rest of the average XBee adapters do (normal use mode), but if you slide the switch to 'Slave mode' you will be able to attach the XtreamBee to any FTDI compatible device, like Arduinos, ArduIMU and Ardupilots.
So you only need two XtreamBees, to create the Master-Slave connection enabling two-way wireless FTDI communication (or one XtreamBee set in 'Slave Mode', if you already have another third party XBee adapter). You can even tweak the board to emulate in a wireless fashion a CTS and RTS signals.
This board was under development for about 1.5 years!
Features:
So you only need two XtreamBees, to create the Master-Slave connection enabling two-way wireless FTDI communication (or one XtreamBee set in 'Slave Mode', if you already have another third party XBee adapter). You can even tweak the board to emulate in a wireless fashion a CTS and RTS signals.
This board was under development for about 1.5 years!
Features:
- Includes 2 x 2 mm female receptor headers to correctly place the XBee module.
- Includes 1 x right angle 6 position male pin headers.
- 3.3V regulator build-in.
- ON Led, Tx/Rx Led's, ASC and RSSI Led (Jumper selectable).
- Master/Slave selector.
- Solder jumper allows you to supply the board directly with 3.3V (Only recommended in Slave Mode).
- Breadboard compatible!
- Screw holes for easy mounting.
- Inexpensive!
- Xbee module not included.
You may also be interested in the following product(s)
Kit MPXV7002DP
€20.60
|
FTDI Cable 3.3V
€18.00
|
Arduino UNO Rev3
€24.20
€22.99
|
Arduino Xbee Shield
€47.20
|
Servo Extension Cable 5cm Female-Female
€1.50
|
Arduino MEGA 2560 |
ArduPilot - Arduino Compatible UAV Controller w/ ATMega328
€21.00
|
Arduino MEGARegular Price: €59.29 Special Price: €39.90 |
| Notes | For more information please click here. |
|---|






